ProControl Series 2^plus

Type A

Product Specification

The next generation Type A ProControl features a capacity of up to 78 industrially-hardened inputs and outputs in a small and easy-to-use package. The Series 2^plus contains everything you need for the core of your control/telemetry system, including the ability to drive motor starters, solenoids and other devices directly from built-in relay outputs. The Series 2^plus includes expanded datalogging and reporting capability, a built-in power supply for your instruments and transducers, as well as pluggable connectors for all I/O. The Type A features higher I/O counts, large datalog memory, greater process control capability, and a vacuum fluorescent display.

	Model A1 $3,495	Model A2 $3,995
*Inputs*
Discrete	Sixteen (16) protected discrete inputs. Support for 4 flowmeters or pulse accumulators with rates to 500Hz.	Twenty-Four (24) protected discrete inputs (Eight of these are status inputs). Support for 4 flowmeters or pulse accumulators with rates to 500Hz.
Analog	Sixteen (16) 4-20ma inputs with built-in 24Vdc supply. Inputs are surge and short-circuit protected and may also be used as discrete inputs	Sixteen (16) 4-20ma inputs with built-in 24Vdc supply. Inputs are surge and short-circuit protected and may also be used as discrete inputs
*Outputs*
Discrete	Twenty-Two (22) relay outputs rated at 1/2A, 120VAC	Thirty (30) relay outputs rated at 1/2A, 120VAC
Analog		Eight (8) 4-20ma outputs. PID loop control.

*Datalogging*
Discrete	30,000 points standard. All logging occurs on change of state.	30,000 points standard. All logging occurs on change of state.
Analog	80,000 points standard (5000 per channel). Flow totals (50 per channel)	80,000 points standard (5000 per channel). Flow totals (50 per channel)
Event	10,000 points standard.	10,000 points standard.
*Communications*
Modem	ProView Software, PC to ProControl Interface - 9600 baud.
FAX	Alarm and Status Reports. Group 3, Class 2 FAX reporting at 9600 baud
Pager	TAP standard numeric and alpha-numeric paging at 300 to 2400 baud.
Local	Direct RS-232 Serial interface with automatic local/remote switching.
e-mail	Via third-party service, alarm and status reports.
Network	Optional - Can be linked via RS-485 for distributed control or higher I/O counts
*User Interface*
Display	VFD (Vacuum Fluorescent Display) 2 x 20 character display
Keypad	2 x 6 membrane keypad.
LEDs	LEDs: System Status, Communications Link, Networking
*Process Control*
System	Up to 64 regular system processes total with 16 startup and 16 shutdown processes. Processes run every 0.35 seconds.
Alarms	Generate shutdowns, two FAX reports and/or two Pager messages.
Loops	PID loop control with user control of setpoint, proportional, integral and differential gains and max change per calculation. Also open loop proportional algorithm. (A2)
*Power*
System	10VAC, 30VA, external transformer provided
I/O Supply	24 VDC, 15V and 9V available for powering sensors/instruments.
*Environmental*
Dimensions	13.5" long x 6" wide x 3.5" high.
Weight	7 lbs.
Power Dissipation	25W
Operating Temperature	-20C to +50C
Humidity	95% R.H. non-condensing

ProControl Series 2plus

ProControl Series 2^plus